An FDA-cleared, biocompatible, and photocurable material intended for manufacturing temporary crown-and-bridge restorations. Performance and strength are the same as conventional acrylic. Fabricating temporary crowns or bridges with this resin requires digital models, a stereolithographic additive printer, and curing light equipment.Specifications Before Curing:Viscosity at 25+/-0.5°C: 1000 cps and 2000 cpsDensity: 1.05 Gm./cm3 and 1.2 Gm./cm3Specifications After Curing:Density: 1.15 Gm./cm3 and 1.25 Gm./cm3Flexural strength: 50 MPaDegree of conversion: 70%