Menú

Filtros

  • Resultados obtenidos en

Nabertherm LHT 01/17 D & LHT 03/17 D

Nabertherm LHT 01/17 D & LHT 03/17 D

El producto señalado no se encuentra en el catálogo.

Nabertherm

Nabertherm LHT 01/17 D & LHT 03/17 D

High-Temperature Furnaces up to 1650°C for Sintering Translucent Zirconia

These high-temperature furnaces are ideally suited for sintering bridges and crowns made of translucent zirconia. The special heating elements made of molybdenum disilicide promise very good protection against chemical interaction between the charge and the furnace components. The bridges and crowns are loaded in ceramic saggars. The furnaces can be individually programmed for all recommended sintering curves by almost all zirconium manufacturers

Features & Benefits:

  • Temperature max 1650°C
  • Furnace chamber with a volume of 1 or 4 liters
  • Special heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements
  • Dual shell housing made of textured stainless-steel sheets with additional fan cooling for low surface temperature
  • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
  • Adjustable air inlet
  • Furnace chamber can be charged with up to two (LHT 01/17D) or three (LHT 03/17D) saggars, 15 or 25 individual crowns per level (depending on model)
  • Exhaust air opening in the roof
  • Type S thermocouple
Model Tmax Inner dimensions in mm Volume Maximum Outer dimensions in mm 3 Connected Electrical Weight Minutes
°C w d h in l units W D H 2 load kW connection* in kg to Tmax 1

LHT 01/17 D

1650 110 120 120 1 30 385 425 525+195 2.2 1-phase 28 10
LHT 03/17 D 1650 125 155 200 4 75 470 630 770+260 3 1-phase 75 60

*These furnaces are available for main voltage of 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE.
1In the empty and closed furnace, connected to 230 V 1/N/PE rsp. 400 V 3/N/PE.
2Including opened lift door.
3External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.

For more information, contact your Zahn Consultant:

Phone:1-800-496-9500